The Celestron Advanced VX 8″ EdgeHD telescope package combines Celestron’s AVX computerised equatorial mount with the acclaimed EdgeHD optical system. With the telescope’s 8 inches of aperture and with the premium StarBright XLT coatings, this telescope gives you over 800 times the light gathering power than the unaided eye and is the lightest and most portable telescope in the range.
The EdgeHD telescope is an aplanatic, flat field Schmidt-Cassegrain telescope that produces aberration-free images across a wide visual and photographic field of view. The optical system was designed to reduce more than just off-axis star coma; it also provides an astrograph-quality flat focal plane all the way to the edge of the field of view.
Many optical designs that advertise themselves as “astrographs” actually only produce pinpoint stars across a curved focal plane. While this may be acceptable for some visual observing, stars will appear out of focus at the edge when used with the flat chip sensor of a digital camera. EdgeHD optics produce a focal plane more than three-times flatter than a standard Schmidt-Cassegrain telescope and dramatically flatter than competing coma-free designs. This guarantees you visibly sharp stars across some of the largest CCD chips available today. The superior edge performance of the EdgeHD not only creates rounder, more pleasing stars, but actually improves the resolution and limiting magnitude when compared to telescopes of equal aperture. With Celestron’s StarBright XLT optical coatings on every surface, EdgeHD optics gives you maximum light throughput across the widest visual and photographic spectrum.
Every EdgeHD that ships has been tested not only for the surface quality of each optical component, but also with a camera and artificial star to ensure the imaging system meets our rigid quality assurance. This “final acceptance test” confirms the EdgeHD will perform in the field and deliver high-quality astroimages.
In addition to EdgeHD’s optimised optical design, the telescope tube has been redesigned to make sure you get the most from your optics each and every night and has the following mechanical features.
- Mirror clutches – Flexible tension clutches hold the mirror in place and reduce image shift when taking long exposure astro-images. Once focused, the flexible rods allow the mirror to be held in place without putting any force or pressure on the mirror assembly, keeping the image centered in the eyepiece (or on the sensor).
- Tube vents – Cooling vents located on the rear cell allow hot air to be released from behind the primary mirror. Each vent has an integrated 95-micron micromesh filter guaranteed to let warm air out without letting dust in.
- Fastar versatility – EdgeHD is the most versatile imaging telescope available today. At its native f/10, you can achieve the image scale necessary to capture the smallest of deep sky objects. Add the optional reducer lens—custom-designed for your size EdgeHD tube—and you can increase your field of view without sacrificing optical performance. A Barlow gives you added power for high-resolution planetary, lunar and solar imaging. All EdgeHD optical tubes are Fastar-compatible, allowing the secondary mirror to be removed and replaced with a third party lens accessory for ultra-fast f/2 wide field imaging.
Celestron’s Advanced VX (AVX) series mount is the smallest of its computerised GOTO equatorial mounts and is designed for use with up to medium sized telescopes with the mount able to carry just over 13kg of payload. The AVX has been designed and engineered from the ground up with astroimaging in mind and sets a new standard in mid-level telescope mounts. It provides many of the features that are found on Celestron’s more sophisticated German equatorial mounts, but at an extremely affordable price. It is designed to provide superior performance for small to mid-size telescopes while taking advantage of Celestron’s most advanced technologies: All-Star Polar Alignment, Celestron PWI telescope control software, SkyAlign, and permanently programmable periodic error correction (PPEC).
The mount includes ports for a hand control, an autoguider, and 2 AUX ports for optional accessories (e.g. StarSense). The NexStar+ hand control gives you instant access to all the functions the mount has to offer. With automatic slewing and menu descriptions, any level of astronomer can master this mount in just a few observing sessions. The AVX also has an impressive tripod with 2” diameter steel legs providing an extra-wide stance for improved stability.
The mount can now be used with Celestron’s PWI (CPWI) software, co-developed with the PlaneWave Instruments, which is an all-in-one solution offering you many of the same features used on PlaneWave’s observatory-class telescopes. The software features a graphical planetarium interface and includes PointXP advanced mount modelling which allows you to add 100+ points to your alignment model for the mount for the most accurate pointing and tracking possible. this makes the AVX with the CPWI software and ideal solution for remote access observatory setups. The mount can also be controlled via the ASCOM telescope interface so it can be used with third party software applications. For more information on CPWI and to see the user interface, click here.
|OPTICAL TUBE INFO:|
|Focal Length||2350mm (93″)|
|Focal Length of Eyepiece 1||23mm (.91″)|
|Magnification of Eyepiece 1||102x|
|Star Diagonal||2″ with 1.25″ adapter|
|Highest Useful Magnification||555x|
|Lowest Useful Magnification||34x|
|Limiting Stellar Magnitude||14.4|
|Resolution (Rayleigh)||.59 arc seconds|
|Resolution (Dawes)||.49 arc seconds|
|Light Gathering Power (Compared to human eye)||1127x|
|Secondary Mirror Obstruction||85mm (3.35″)|
|Secondary Mirror Obstruction by Diameter||36%|
|Secondary Mirror Obstruction by Area||13%|
|Optical Coatings||StarBright XLT|
|Optical Tube Length||559mm (22″)|
|Optical Tube Diameter||271.78mm (10.7″)|
|Optical Tube Weight||21 lbs (9.53 kg)|
|Dovetail||CGE Dovetail bar|
|Mount Type||Computerised Equatorial|
|Instrument load capacity||30 lbs (13.6 kg)|
|Height adjustment range (includes mount and tripod)||1118mm – 1626mm (44″ – 64″)|
|Tripod Leg Diameter||50.8mm (2″) Stainless Steel|
|Latitude adjustment range||7° – 77°|
|Mount Head Weight||17 lbs (7.71 kg)|
|Tripod Weight||18 lbs (8.16 kg)|
|Weight of Counterweights||2 x 12 lbs|
|Slew Speeds||9 slew speeds – max speed 4°/second|
|Tracking Rates||Sidereal, Solar and Lunar|
|Tracking Modes||EQ North & EQ South|
|Dovetail Compatibility||Dual saddle plates (CG-5 and CGE saddle)|
|Number of Auxiliary ports||3 Aux ports (1 hand control and 2 AUX ports for optional accessories|
|USB Port||Yes, input on Hand Control|
|Power Requirements||12V DC 3.5A (tip positive)|
|Motor Drive||DC servo motors|
|Alignment Procedures||2-Star Align, 1-Star Align, Solar System Align, Last Alignment, Quick Align|
|Periodic Error Correction||Yes|
|Computerised Hand Control||2 line x 18 character backlit Liquid Crystal Display, 19 LED backlit buttons, USB 2.0 port for PC connection|
|NexStar+ Database||40,000+ objects, 100 user defined programmable objects. Enhanced information on over 200 objects|
|Software||Celestron’s Starry Night Special Edition Software, SkyPortal App|
|Total Kit Weight||47 lbs (21.31 kg)|
|Included Items||Advanced VX Equatorial Head | Tripod | Accessory Tray | 2 x 12 lbs counterweights | NexStar+ Hand Control | DC Power Cable (item# 18769) | Hand Control Holster|